Road Roller Troubleshooting and Solutions: Clutch

1. Incomplete Clutch Disengagement or Insufficient Engagement Force

Causes:

1.1 Excessive clearance between the release bearing and release lever.

1.2 Excessive friction and wear.

1.3 Oil contamination on the friction plates.

1.4 Burned-out release bearing.

Solutions:

1.1 Adjust the clearance.

1.2 Replace with a new part.

1.3 Remove surface oil contamination.

1.4 Replace with a new part.

2. Clutch Not Working

Causes:

2.1 Release bearing spring has fallen off.

2.2 Burned-out release bearing.

2.3 Burned-out friction plates.

Solutions:

2.1 Reinstall or replace with a new part.

2.2 Replace with a new part.

2.3 Replace with a new part.

3. Clutch Overheating

Causes:

1.1 Incomplete clutch disengagement.

1.2 Clutch slippage.

1.3 Deformed friction plates.

1.4 Poor ventilation and heat dissipation.

1.5 Prolonged overload operation.

Solutions:

1.1 Adjust or replace.

1.2 Adjust or replace.

1.3 Correct or replace.

1.4 Unblock the heat dissipation vents in the clutch housing.

1.5 Change operating conditions or stop the machine to cool down.

The Lutong LT204 road roller is a single-drum vibratory road roller with a working mass of 4 tons and a compaction width of 1.28m. It is suitable for compaction of basic road surfaces, such as municipal road maintenance, building construction, sports fields, and industrial sites.